Original price was: USD $18,899.00.USD $16,064.00Current price is: USD $16,064.00. (exc. Tax)
Display Model – New Condition – Full Warranty
normally USD $18,899 (pair)
SALE USD $16,064 (save $2,835)
NAMM exhibition stock shipped from Chicago
N.B. Shipping Fees from Chicago will be added to price
For purchasing stock held in Chicago contact Garett Body
GBody Sound Lab (Chicago)
+1 (630) 864-7050
“They may be in the wall but they sound like headphones”
“The Big Reds have to be heard to be believed”
Now you don’t have to adjust your control room to cater for the imperfection of the classic far field monitors. You can fine tune your control room acoustics for accuracy, not for the resonance of honky far field speakers.
**N.B. SoundID Reference From Sonarworks not included with Sale items**
Visit Wayne Jones Audio for more Details & Photos ►
For purchase contact Garett Body
GBody Sound Lab (Chicago)
+1 (630) 864-7050
N.B. The buyer is responsible for paying any additional costs such as duties, taxes, and customs clearance fees.
Only 1 Remaining in Stock
-
Description
Cabinet Specifications
- Finish – Stunning 2 Pak/Matte Automotive paint finish with high gloss clear coats
- Standard finish is a high gloss red face with the rest of the monitor finished in charcoal matte clear
- Available in custom colours. Match your décor, order your preferred colour
- Woodwork 18mm MDF
Cabinet Specs – for each cabinet:
- Power – 2000 Watts RMS powered
- Channel 1: 1 x 10” Bass driver – 500 Watts RMS @4ohms
- Channel 2: 1 x 10” Bass driver – 500 Watts RMS @4ohms
- Channel 3: Mid Range – 500 Watts RMS @ 4ohms
- Channel 4: Tweeter – 500 Watts RMS @ 8ohms
- Power Amps: Four state of the art D class switch mode power amps with heat sink plates mounted into the rear of the cabinet
- Power Amp frequency: 20 Hz – 20 kHz
- Cabinet tuning: 35 Hz to 20 kHz
- Cabinet response: Half loudness Graphed down to 28 Hz
- HPF switch at 30 Hz for high level monitoring applications
- Bass Drivers: Two custom handmade 10” bass drivers, Kevlar impregnated eucalyptus pulp air-dried cones. Magnets – Massive Ferrite
- Voice coil: 3″
- Midrange 6.5″ Long stroke, ultra-low distortion. Ferrite magnet
- Tweeter: Machined aluminium bullet-style tweeter with a 1.46″ Voice coil
- Crossover points: 160 Hz 1950 Hz 2250 Hz
- Control plates: Black Steel
- Universal Mains Power in: Standard IEC
DSP & Control Plate Features:
- Inputs: XLR Analogue Balanced (with SPDIF option)
- DSP – 192K SHARC processing
- USB connector for WJ Audio use only. Used for software updates
- 3 Toggle switches with selections (centre position is Flat – undeniably accurate)
- Inputs: XLR Analogue / SPDIF
- Room 1: Inactive. For future development /
Room 2: SoundID Reference calibration (preloaded with test profile) - Room 3: Inactive. For future development /
30Hz HPF
- LED on Control Panel for power operation
Single Monitor Dimensions:
- H60 x W64.5 x D49.5 cm Approx
- 23.6 x 25.4 x 19.5 inches
Shipping Dimensions & Weights:
- Shipped as a pair on a pallet (included in shipping weight & dimensions)
- H110 x W110 x D81 cm (43.3 x 43.3 x 32 in)
- Weight 120 KG (265 lbs)
**N.B. SoundID Reference From Sonarworks not included with Sale items**
For purchase contact Garett Body
GBody Sound Lab (Chicago)
+1 (630) 864-7050
N.B. The buyer is responsible for paying any additional costs such as duties, taxes, and customs clearance fees.
Additional information
| Weight | 120 kg |
|---|---|
| Dimensions | 110 × 110 × 81 cm |
| Shipping | Above dimensions and weight are shipping measurements for a pair of monitors. (including shipping pallet) Dimensions include shipping pallet. Shipping costs are calculated on the Checkout page. N.B. The buyer is responsible for paying any additional costs such as duties, taxes, and customs clearance fees. Products shipped from Melbourne, Australia. Shipped as one pair on a pallet (included in shipping weight & dimensions) H110 x W110 x D81 cm (32 x 47.3 x 39.4 in) Weight 120 kg (265 lbs) |
| Colour | Red, Graphite, Custom Colour |